Form:

NINGBO RENYI CASTING MACHINERY MANUFACTURER is one of China professionally manufacturer and dedicated supplier of various castings including investment casting, sand casting and aluminum die casting one.For investment casting, we adopt the method of soluble glass, complex shell, silicasol to make precision casting parts. And for sand casting, we adopt resin sand process to make grey iron and ductile castings.  As for die casting, mostly we make the aluminum or alloy aluminum casting parts.

Die casting machine between 250kN to 1000kN. Aluminum casting cast from several grams to kilograms. Supply finish machining process when customer require.

More informaiton:http://www.chinese-hisuppliers.com/casting/ or http://www.china-die-casting.com/pressurediecasting/Pressure_Die_Casting.htm

Link:Die Casting,wind generators,Wind turbine,Iron Casting,Aluminum Radiator,Shower Room,Hydraulic Valves,plate rolling machine,pneumatic cylinders,coaxial cable,Electric Winches,Bedroom Furniture

Die-casting is similar to Permanent mold castings except that the metal is injected into the mold under high pressure of 10-210Mpa (1,450-30,500) psi . This results in a more uniform part, generally good surface finish and good dimensional accuracy, as good as 0.2 % of casting dimension. For many parts, post-machining can be totally eliminated, or very light machining may be required to bring dimensions to size.

Die-casting can be done using a cold chamber or   hot chamber process

1.In a cold chamber process, the molten metal is ladled into the cold chamber for each shot. There is less time exposure of the melt to the plunger walls or the plunger. This is particularly useful for metals such as Aluminum, and Copper (and its alloys) that alloy easily with Iron at the higher temperatures.

2.In a hot chamber process the pressure chamber is connected to the die cavity is immersed permanently in the molten metal. The inlet port of the pressurizing cylinder is uncovered as the plunger moves to the open (unpressurized) position. This allows a new charge of molten metal to fill the cavity and thus can fill the cavity faster than the cold chamber process. The hot chamber process is used for metals of low melting point and high fluidity such as tin, zinc, and lead that tend not to alloy easily with steel at their melt temperatures.

Die casting molds (called dies in the industry) tend to be expensive as they are made from hardened steel-also the cycle time for building these tend to be long. Also the stronger and harder metals such as iron and steel cannot be die-cast

Common Alloys in Die Casting

Aluminum, Zinc and Copper alloys are the materials predominantly used in die-casting. On the other hand, pure Aluminum die casting is rarely cast due to high shrinkage, and susceptibility to hot cracking. It is alloyed with Silicon, which increases melt fluidity, reduces machinability. Copper is another alloying element, which increases hardness, reduces ductility, and reduces corrosion resistance.

Aluminum is cast at a temperature of 650 ºC (1200 ºF). It is alloyed with Silicon 9% and Copper about 3.5% to form the Aluminum Association 380 alloy (UNS A03800). Silicon increases the melt fluidity, reduces machinability, Copper increases hardness and reduces the ductility. By greatly reducing the amount of Copper (less than 0.6%) the chemical resistance is improved; thus, AA 360 (UNS A03600) is formulated for use in marine environments. A high silicon alloy is used in automotive engines for cylinder castings, AA 390 (UNS A03900) with 17% Silicon for high wear resistance. Common aluminum alloys for die casting are summarized as follows:

Material	Silicon	Copper	Tensile Strength MPa (ksi)	Properties
AA 380 (UNS A03800)	8.5 %	3.5 %	324 (47)	Fair easy to fill
AA 384 (UNS A03840)	11 %	4 %	331 (48)	Easy to fill
AA 386 (UNS A03860)	9.5 %	0.6 %	317 (46)	Good corrosion resistance
AA 390 (UNS A03900)	17 %	4.5 %	283 (41)	Good wear resistance

Zinc can be made to close tolerances and with thinner walls than Aluminum, due to its high melt fluidity. Zinc is alloyed with Aluminum (4%), which adds strength and hardness. The casting is done at a fairly low temperature of 425 ºC (800 ºF) so the part does not have to cool much before it can be ejected from the die. This, in combination with the fact that Zinc can be run using a hot chamber process allows for a fast fill, fast cooling (and ejection) and a short cycle time. Zinc alloys are used in making precision parts such as sprockets, gears, and connector housings.

Copper alloys are used in plumbing, electrical and marine applications where corrosion and wear resistance is important.

Minimum wall thicknesses and minimum draft angles for die casting are :

Material	Min. Thickness mm (in)	Min. Draft Angle (º)
Aluminum alloys	0.9 mm (0.035 in)	0.5
Zinc alloys	0.6 mm (0.025 in)	0.25
Copper alloys (Brass)	1.25 mm (0.050 in)	0.7

Die-castings are typically limited from 20 kg (55 lb) max. for Magnesium, to 35 kg (77 lb) max. for Zinc. Large castings tend to have greater porosity problems, due to entrapped air, and the melt solidifying before it gets to the furthest extremities of the die-cast cavity. The porosity problem can be somewhat overcome by vacuum die casting

From a design point of view, it is best to design parts with uniform wall thicknesses and cores of simple shapes. Heavy sections cause cooling problems, trapped gases causing porosity. All corners should be radiused generously to avoid stress concentration. Draft allowance should be provided to all for releasing the parts-these are typically 0.25º to 0.75º per side depending on the material.

From:http://www.china-die-casting.com/Die_Casting_Technical_Introduction.htm

Links:wooden toys,auto bearing,automotive bearings,water filters,ball valves,China Manufacturer,China Manufacturers,China Manufacture directory,Seo Web link,Web Link

NINGBO RENYI CASTING MACHINERY MANUFACTURER is one of China professionally manufacturer and dedicated supplier of various castings including investment casting, sand casting and aluminum die casting one

恭喜，您的博客已成功创建！
要进入您博客的各个设置选项，请点击这个链接"登录"：登录时使用的用户名：Admin，密码：您的密码（您申请博客时设置的密码）。一旦登录成功，允许您进入管理员控制面板的工具栏将自动出现在页面上方。

（这是一个范本，若您认为不需要，您随时可以将其删除）